Air Conditioner and Heater Plumbing for 2009 Dodge Challenger
No.
Part # / Description / Price
Price
N/A
Expansion Valve O Ring 
Mopar
Mopar Description: [15.5mm]. [15mm]. 15.51mm ID 2.63mm Thick. 15.51mm ID 2.63 thick. 3/4 Evaporator to H-Valve. 3/4 Expansion Valve to Evaporator. Suction. Valve to Evaperator. 15.54MM ID.
N/A
Expansion Valve O Ring Mopar
Mopar Description: 3/8. 3/4 inch, Red. Evaporator Side 10mm. 1/2 Evaporator to H-Valve. 1/2 Expansion Valve to Evaporator. Up to 02/29/12. Liquid. Valve to Evaperator. 10.25MM ID.
$16.25
$16.25
N/A
A/C Line Valve Core Mopar
Mopar Description: Valve core. Accumulator. After 12-01-03, After 12-12-03. Standard.
$40.75
$40.75
11
A/C Pressure Transducer Valve Mopar
Mopar Description: Liquid Line. Includes: O-Ring. Up To 06/28/2010. Discharge Line. Includes Item # 4.
$237.50
$237.50
12
A/C Line O Ring Mopar
Mopar Description: Switch to Line. Used at Switch. Suction line. For Transducer Valve.
$31.31
$31.31
14
$11.44
15
Hex Flange Lock Nut, Mounting Mopar
Mopar Notes: Engines: 6.1L V8 SRT HEMI ENGINE.
Description: M6x1.00. Throttle Body Shield to Intake Manifold. Heater return tube to engine. Rod to Lever Assembly. Engine Oil Level Indicator Tube. Accelerator Pedal Assembly to Dash Panel. M6. Quantity Of 4 Is Needed. Parking Brake Cable Guide to Floor Pan.
$1.13
$1.13
18
A/C Line Seal Mopar
Mopar Description: Round 5/8in. 5/8". Suction line. Serviced with Expansion Valve. Slim Line.
$30.06
$30.06
25
O Ring Mopar
Mopar Description: 1/2 inch. Liquid Line to Drier. Line to Condenser. Discharge line to Compressor.
26
Condenser And Trans Cooler Cooler Mopar
Mopar Description: With Drier - NOTE:25 pc min Qty Mix and Match Pallet Program only, Use mopar.com to order, Magneti-Marelli Parts tab. Includes: Mounting Bracket and Drier. [nmc,xdk].
26
Condenser And Trans Cooler Cooler Mopar
Mopar Description: With Drier. Includes: Mounting Bracket and Drier.